New magnetic guide sensor from Naviq features angle measurement

Naviq today introduced the MTS160, a magnetic overview sensing unit for mobile robotics. Magnetic advice entails positioning sticky magnetic tape on the flooring, which the robotic detects and complies with throughout the center.

The brand-new, copyrighted sensing unit provides angle dimension with 1-degree accuracy and placement precision within 1 mm (0.039 in.). Naviq asserted that this twin capability offers accuracy for both positioning and positioning, dramatically boosting the navigating capacities of automated led automobiles (AGVs).

For robotics that comply with a magnetic line around a center, typical magnetic overview sensing units just give one-dimensional placement details, showing just how much the robotic differs the facility of the course. The typical technique for guiding improvement in robotics is symmetrical control, where the guiding change is symmetrical to the mistake found in between the robotic’s determined placement and the wanted placement.

Naviq assures quicker contour complying with

The MTS160’s brand-new angle discovery enables the robotic to analyze the curvature of the track, stated Naviq. This makes it possible for the robotic to compare small trajectory changes required on straight courses and even more aggressive guiding for browsing contours.

This better path-tracking accuracy enables robotics to comply with assigned courses with boosted precision and to browse bends at greater rates, stated the Geneva, Switzerland-based business.

While magnet tape-following robotics need that the center be changed prior to the robotic can begin procedures, customizing the course is as basic as relocating the tape, a job calling for no unique abilities. The courses resemble railway tracks, and the automobiles remain on the course, Naviq kept in mind.

The business included that the MT160 sustains pens with reversed polarity to signify locations calling for rate changes, upcoming forks, and merges, and closeness to quit locations such as billing or loading/unloading terminals. Additionally, Naviq has actually produced a formula for smooth instructions adjustments at joints.

The MT160 can operate as the main advice sensing unit at much less cost than vision systems or enhance laser or vision navigating systems for exact, last-millimeter positioning, stated the business.

Register currently.

MTS160 sustains container bus user interface

The MTS160 includes an M8 four-pin water tight port for power and signal transmission. It sustains container bus and RS232 user interfaces, making certain compatibility with all PLC brand names and microcomputers, stated Naviq.

The system’s portable layout, determining just 165 x 35 x 25 mm (6.4 x 1.3 x 0.9 in.), makes it simple to integrate right into robotics for really slim aisles, individual movement shuttle bus, and robotics cam dollies, it insisted.

Naviq stated it developed its interface for ease, including RGB standing LEDs for aesthetic responses on tape and pen discovery. An Online energy needs no installment and attaches the sensing unit to a smart device or computer using USB port for simple setup, screening, logging, and surveillance.

The energy additionally sustains automated firmware updates., and the inner wiring can immediately run self-tests to make sure secure procedure and dependable efficiency, stated Naviq.

The MTS160 listings for $495 (EUR480) each.